Can Am Spyder Forum banner
1 - 12 of 12 Posts

·
SpyderRyders
Joined
·
3,463 Posts
Discussion Starter · #1 ·
Just a quick post, all bugs worked out by 9:30 am this morning, have been out crusing around. Will post some pics and my first impressions. Going back out to for more riding before dark.
 

·
SpyderRyders
Joined
·
3,463 Posts
Today went a lot better than yesterday, arrived at the shop about 9:15am and Jim had solved the drive belt alignment/tension. The Yuasa battery had developed
a leak in one cell, so it was replaced using the battery from the demo bike. The windshield had encounter some scratches during shipment, caused by the protective
plastic loosing adhesion and being blown from wind against the windsheild. This was also was replaced from the demo bike.



Jim & Noah had finsihed the software check out and there were no faults detected, so it passed.
(these two pics was from yesterday)




The Spyder software has a nag screen, "Before Operating Read Safety Card Above, Then Press M.


This is the location of card.


The safety card.


The Spyder will not start without pushing the "M" button.


A few pics from this evening.





And the serial #



It has been a few long days so going to crash for the evening, will post a ride report and some thoughts tomorrow.
 

·
Registered
Joined
·
19 Posts
Today went a lot better than yesterday, arrived at the shop about 9:15am and Jim had solved the drive belt alignment/tension. The Yuasa battery had developed
a leak in one cell, so it was replaced using the battery from the demo bike. The windshield had encounter some scratches during shipment, caused by the protective
plastic loosing adhesion and being blown from wind against the windsheild. This was also was replaced from the demo bike.



Jim & Noah had finsihed the software check out and there were no faults detected, so it passed.
(these two pics was from yesterday)




The Spyder software has a nag screen, "Before Operating Read Safety Card Above, Then Press M.


This is the location of card.


The safety card.


The Spyder will not start without pushing the "M" button.


A few pics from this evening.





And the serial #



It has been a few long days so going to crash for the evening, will post a ride report and some thoughts tomorrow.
Man those pic look good, thank you
 

·
Inadvance Member
Joined
·
1,744 Posts
Tharkun
Thank you for the ALL the great pictures and information through the process thus far and keep them coming, they are VERY much appreciated and helps, just a little, to know more are on the way. #409 thats cool. Thought you would have gone with silver seeing all the blue toys in the stable.
 
1 - 12 of 12 Posts
Top