Can Am Spyder Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
My buddy needs to order some plugs for his sled it's an 05 800 Ho PowerTEK. I know the BR9ECS is a pregapped plug that comes in at least 2 gaps. Which one is right for the PowerTEK??

According to the manual it should have the .5mm
According to the sticker under the hood it should have the .8mm (same as SDI)

Per Ski doo site....

04 800 HO .5mm
05 800 HO PTK .5mm
06 800 HO PTK .8mm

I wish they could get it straight

Thanks for any help, and thanks to can-amtalk for having us stay with them while our house is getting renovated.
 

·
Registered
Joined
·
14 Posts
i would say used the .8mm since that is what the sled says, sometimes the manuals are off, i dont think have a .3mm plug will hurt anything if it was sopose to be .5mm but that is just my thinking
 

·
Registered
Joined
·
2 Posts
I have an 05 ptech.The sticker on the sled is in error.BRP says use the .5mm(.019").That is waht came in mine from factory.
Rich
 
1 - 4 of 4 Posts
Top