can-am Spyder Forums - SpyderTalk.com: F1 EVO III Cruiser windshield info - can-am Spyder Forums - SpyderTalk.com

Jump to content

  • 2 Pages +
  • 1
  • 2
  • You cannot start a new topic
  • You cannot reply to this topic

F1 EVO III Cruiser windshield info Rate Topic: -----

#21 User is offline   Putt-Putt 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 1,140
  • Joined: 23-December 07
  • Your Ride:outlander 800-BMW-Yamaha-suzuki-Can Am Spyder

Posted 18 August 2008 - 06:12 PM

Who makes this CalSci or Clasic windshield? Must of been sleeping as I missed it.
0

#22 User is offline   go2lkg 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 30
  • Joined: 13-May 08
  • Location:Richmond, VA
  • Your Ride:Silver Spyder w/CalSci windshield & tribal spider graphics

Posted 19 August 2008 - 07:52 AM

View PostPutt-Putt, on Aug 18 2008, 07:12 PM, said:

Who makes this CalSci or Clasic windshield? Must of been sleeping as I missed it.


Go to http://www.calsci.co...Spyderprod.html and you can order it from there.

Put mine on last night in 5 minutes! Lined up like a charm :) Took the bike out for a test drive and it is perfect...gives me a little breeze though the vent, no buffeting, and I get NO helmet wind...didn't even get bugs on my helmet :thumbs:

Came with its own cleaning towel and spray, and was wrapped in its own soft fabric case...CalSci knows what they are doing :D

GO2LKG
0

#23 User is offline   NVR2L8 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 708
  • Joined: 07-July 07
  • Location:Street, Md.
  • Your Ride:OUTLANDER 800 XT Ordered on 04/19/2007 #7 of 12

Posted 19 August 2008 - 02:01 PM

Can you provide us with the Height of the Windshield you ordered and YOUR height as well?
Thanks
0

#24 User is offline   go2lkg 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 30
  • Joined: 13-May 08
  • Location:Richmond, VA
  • Your Ride:Silver Spyder w/CalSci windshield & tribal spider graphics

Posted 19 August 2008 - 04:41 PM

View Postgo2lkg, on Aug 19 2008, 08:52 AM, said:

Go to http://www.calsci.co...Spyderprod.html and you can order it from there.

Put mine on last night in 5 minutes! Lined up like a charm :) Took the bike out for a test drive and it is perfect...gives me a little breeze though the vent, no buffeting, and I get NO helmet wind...didn't even get bugs on my helmet :thumbs:

Came with its own cleaning towel and spray, and was wrapped in its own soft fabric case...CalSci knows what they are doing :D

GO2LKG


I ordered the Large sized windshield and am 5'11" with a normal size torso. When I look straight out I am looking directly over the top of the windshield by approximately an 1" or so, but because of the design, I don't feel a lot of wind AND the middle of with windshield is not in my direct line of sight. If I follow the airflow from the vent, it comes up and offers me a slight breeze right at my chin. The only thing that you have to adjust (ever so slightly) is the clutch lever, especially if you have it extended all the way out. When you turn right, if you don't adjust it, the lever will hit the side of the windshield, but the instructions that come with the windshield tell you exactly what to do. GO2LKG
0

#25 User is offline   Spyder in Georgia 

  • Former Georgia Spyder Owner
  • PipPipPip
  • Group: Members
  • Posts: 174
  • Joined: 17-August 08
  • Gender:Male
  • Location:Auburn, AL
  • Interests:Internet, Computers, Camping, Trips, Motorcycle riding, and teaching.
  • Your Ride:Honda NT700V Silver with ABS.

Posted 09 October 2008 - 10:04 AM

View Postgo2lkg, on Aug 19 2008, 04:41 PM, said:

I ordered the Large sized windshield and am 5'11" with a normal size torso. When I look straight out I am looking directly over the top of the windshield by approximately an 1" or so, but because of the design, I don't feel a lot of wind AND the middle of with windshield is not in my direct line of sight. If I follow the airflow from the vent, it comes up and offers me a slight breeze right at my chin. The only thing that you have to adjust (ever so slightly) is the clutch lever, especially if you have it extended all the way out. When you turn right, if you don't adjust it, the lever will hit the side of the windshield, but the instructions that come with the windshield tell you exactly what to do. GO2LKG



Dear sir,

It has been a while since your initial assessment of your new windshield. I too, ordered the CalSci Large and it should be in soon. I was wondering, do you have an updated assessment of the CalSci to provide?

Thank you again!
Scott
0

#26 User is offline   go2lkg 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 30
  • Joined: 13-May 08
  • Location:Richmond, VA
  • Your Ride:Silver Spyder w/CalSci windshield & tribal spider graphics

Posted 10 October 2008 - 08:52 PM

View PostSpyder in Georgia, on Oct 9 2008, 11:04 AM, said:

Dear sir,

It has been a while since your initial assessment of your new windshield. I too, ordered the CalSci Large and it should be in soon. I was wondering, do you have an updated assessment of the CalSci to provide?

Thank you again!
Scott


Love it! I did mount it with cheap rubber gaskets that didn't come with it just to make sure it didn't spider crack around the mounting holes. Great mod!! Good luck - GO2LKG
0

Share this topic:


  • 2 Pages +
  • 1
  • 2
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users










forums  |   gallery  |   sponsors  |   articles  |   contact us 

All Spyders ~ All The Time
  ©2008 - 2012 DOOTalk, LLC