Sign In »
Register Now!
Help
I just mounted mine to the stock wind shield, with a garmin mount that I had for a bmw. Plug into the &#@. outlet.
Garmin Zumo 550 Install (pics)
installed Zumo on Spydie
Rate Topic:
1 Votes
#21
- doctor
-
- Group: Members
- Posts: 388
- Joined: 18-December 07
- Location:lincoln,ca
- Your Ride:#1058
Posted 11 January 2010 - 02:47 PM
#22
- SpyderRyders
-
- Group: SPYDER NATION
- Posts: 3,463
- Joined: 21-October 07
- Gender:Male
- Location:Tracy,CA
- Interests:Spyder Rydes and tours.
- Your Ride:2010 Spyder RT-S SE5 & RT 622 Orbital Blue
-
Posted 11 January 2010 - 03:42 PM
doctor, on 11 January 2010 - 02:47 PM, said:
I just mounted mine to the stock wind shield, with a garmin mount that I had for a bmw. Plug into the &#@. outlet.
What is " &#@ " and without pics, your post is not really helpful.
#23
- Newbie
-
- Group: Members
- Posts: 2
- Joined: 28-January 10
- Your Ride:Spyder RT
Posted 18 February 2010 - 01:29 AM
Has anyone access to a copy of the Zumo 660 mounting instructions and if so could they copy them and post on this site. I have a Zumo 550 and so dont want to upgrade to a 660, so very interested in where the Canam Zumo 660 mounting bracket plugs into an RT-S. I have fitted a 'Ram" B 272 45degree base with 9mm hole fitting, on top of a stainless steel bush, made by a friend out of a 1/2 inch stainless bolt. The original bolt was replaced by a longer one. The supplied ram mount is attached to this, then to the Zumo cradle
Attached image(s)
#24
- SpyderRyders
-
- Group: SPYDER NATION
- Posts: 3,463
- Joined: 21-October 07
- Gender:Male
- Location:Tracy,CA
- Interests:Spyder Rydes and tours.
- Your Ride:2010 Spyder RT-S SE5 & RT 622 Orbital Blue
-
Posted 18 February 2010 - 09:52 AM
Chopper66, on 18 February 2010 - 01:29 AM, said:
Has anyone access to a copy of the Zumo 660 mounting instructions and if so could they copy them and post on this site. I have a Zumo 550 and so dont want to upgrade to a 660, so very interested in where the Canam Zumo 660 mounting bracket plugs into an RT-S. I have fitted a 'Ram" B 272 45degree base with 9mm hole fitting, on top of a stainless steel bush, made by a friend out of a 1/2 inch stainless bolt. The original bolt was replaced by a longer one. The supplied ram mount is attached to this, then to the Zumo cradle
Working on a post for the Zumo 660, link is below.
HERE
#25
- Newbie
-
- Group: Members
- Posts: 8
- Joined: 20-February 10
- Gender:Male
- Your Ride:2010 Spyder RT-S
Posted 21 February 2010 - 06:36 PM
Chopper66, on 18 February 2010 - 01:29 AM, said:
Has anyone access to a copy of the Zumo 660 mounting instructions and if so could they copy them and post on this site. I have a Zumo 550 and so dont want to upgrade to a 660, so very interested in where the Canam Zumo 660 mounting bracket plugs into an RT-S. I have fitted a 'Ram" B 272 45degree base with 9mm hole fitting, on top of a stainless steel bush, made by a friend out of a 1/2 inch stainless bolt. The original bolt was replaced by a longer one. The supplied ram mount is attached to this, then to the Zumo cradle
Nicely done. I'm in the same position, except I don't have the RT yet. I'm very happy with my Zumo 505, and don't see any reason to upgrade to a 660, so I'm sure I'll have to come up with a similar way of mounting and powering my 550.
