Sign In »
Register Now!
Help
I have and makes the 1000% difference on the heat and has quieted the motor down. Althought it does smoke loke you won't beleave.
I recommend it....
Page 1 of 1
Has any one covered up the exhuast pipes yet?
Rate Topic:
#1
- Member
-
- Group: Members
- Posts: 10
- Joined: 12-June 11
- Your Ride:2011 Spyder RS 2008 Goldwing
Posted 14 June 2011 - 02:54 PM
#2
- Newbie
-
- Group: Members
- Posts: 4
- Joined: 24-March 10
- Gender:Male
- Your Ride:09 Spyder SE5
Posted 14 June 2011 - 06:25 PM
I wrapped the left side last year, and there is a noticeable difference. After the initial burn-in, you shouldn't expect any smoke.
View Garage
#3
- Arthur---Mexico City
-
- Group: Members
- Posts: 155
- Joined: 12-October 09
- Gender:Male
- Location:Ibsen 72, Mexico City, Mexico 11560
- Interests:Motorcycling, collecting antique clocks, ham radio, photography, home machine shop, model live steam locomotives, repairing clocks--not watches.
- Your Ride:HD s/c and Spyder
Posted 14 June 2011 - 09:45 PM
The last time I was in the States I puurchased the tape for wrapping the exhuast pipes but I did not purchase the aerosol container with the glue or whatever it is because I knew it would be confiscated when my suitcase was inspected. Now I don't know what I should use to glue the tape in place. Any ideas. Many thanks. Arthur, <xe1ll@prodigy.net.mx>
#4
- Member
-
- Group: Members
- Posts: 10
- Joined: 12-June 11
- Your Ride:2011 Spyder RS 2008 Goldwing
Posted 15 June 2011 - 07:07 PM
Arthur---Mexico City, on 14 June 2011 - 09:45 PM, said:
The last time I was in the States I puurchased the tape for wrapping the exhuast pipes but I did not purchase the aerosol container with the glue or whatever it is because I knew it would be confiscated when my suitcase was inspected. Now I don't know what I should use to glue the tape in place. Any ideas. Many thanks. Arthur, <xe1ll@prodigy.net.mx>
I used safety wire. Wraped the first round around the pipe, and wired it. Took it to the other end, the clamp side, and put the clamp around it.
I did both manifold pipes, cut my hands up in the process, and removed the muffler and cross over pipe. Makes it a lot easier. Wrap them up, put it
back together, and rode it. Talk about smoke. I would advise to ride it for about an hour before pitting it up for the night. I set the smoke detector
off in the garage.
Share this topic:
Page 1 of 1