Sign In »
Register Now!
Help
I see quite a few 08's for sale with 12 volt plug in. and 12 volt plug ins on ebay. How difficult to install?? Any tricks?? wingie
Page 1 of 1
12 volt plug in
how difficult
Rate Topic:
#1
- Advanced Member
-
- Group: Members
- Posts: 102
- Joined: 21-May 10
- Your Ride:2008 spyder
Posted 09 July 2010 - 01:19 AM
View Garage
#2
- Advanced Member
-
- Group: Members
- Posts: 572
- Joined: 17-December 07
- Location:Gulf Breeze, FL
- Your Ride:91 K100 RS, Silver Spyder #1232
-
Posted 09 July 2010 - 08:02 AM
Easy for anyone with basic wiring skills to follow the instructions. There is not usually a fuse in the circuit to the new power outlet. It is only a 3 amp circuit.
Silver PE#1232 All The Gear All The Time - ATGATT
#3
- Newbie
-
- Group: Members
- Posts: 7
- Joined: 05-April 10
- Your Ride:2007 blizzard
Posted 23 April 2011 - 07:02 PM
sabunim5, on 09 July 2010 - 08:02 AM, said:
Easy for anyone with basic wiring skills to follow the instructions. There is not usually a fuse in the circuit to the new power outlet. It is only a 3 amp circuit.
where to they normally get installed on the bike? WHere do u wire it to? is there a place in the existing plug in on the harness to plug 12 volt plug into?
#4
- Advanced Member
-
- Group: Members
- Posts: 342
- Joined: 11-November 07
- Location:Gold Coast Australia
- Your Ride:Spyder #930 - http://www.spyderryders.net.au
-
Posted 24 April 2011 - 05:48 PM
ssmskidoo, on 23 April 2011 - 07:02 PM, said:
where to they normally get installed on the bike? WHere do u wire it to? is there a place in the existing plug in on the harness to plug 12 volt plug into?
Open the trunk and look at the right hand side (facing trunk) top. There is, from memory, a circular mark where the socket goes. The wiring is already in place just behind here attached to the frame (on Australian Spyders anyway). No new wiring needed , just plug in.
Martin #930 Australian Spyderryders.net.au
Share this topic:
Page 1 of 1