rides
Rate Topic:
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 27 June 2010 - 06:58 AM
 spyderme, on 27 June 2010 - 05:44 AM, said:
Hi Guys
Dates for your calendar as below:
July.........Sun, 25th
August.......Sun, 22nd
September....Sun, 26th
October......Sun, 24th
November.....Sun, 28th
December.....Sun, 26th
Any suggestions for a meeting place and or destinations?
Hunter, Berry, Taralga, Megalong Valley, Denman.....preferably with a nice Pub to eat at.
Al
PE 946
Hi al the 26th dec maybe a bad one day after xmas. as for destinations Megalong I would leave till early summer way to unpredictable for cold damp days before then.
Hunter for the next trip would be nice Brusta might suggest a nice place for lunch.
Got some pics of garrys new Spyder with his old sm5 pe#998 outside my house have to shrink them first.
0
 - Advanced Member
-
-
Group:
SPYDER NATION
-
Posts:
152
-
Joined:
13-March 10
-
Gender:Male
-
Location:australia nsw sth coast
-
Interests:bikes cars family having fun footy fishing twisties and meetin new friends far and wide
-
Your Ride:yellow08 sm5 with mods
Posted 27 June 2010 - 07:05 AM
spyderme, on 27 June 2010 - 05:44 AM, said:
Hi Guys
Dates for your calendar as below:
July.........Sun, 25th
August.......Sun, 22nd
September....Sun, 26th
October......Sun, 24th
November.....Sun, 28th
December.....Sun, 26th
Any suggestions for a meeting place and or destinations?
Hunter, Berry, Taralga, Megalong Valley, Denman.....preferably with a nice Pub to eat at.
Al
PE 946
what about picton pub,batesmanbay moruya, nerriga dont really matter to me as long as my &#@ is in the seat hahahahaha and we will make it an overnite one for me and the boss
mods tbexhaust,tbjuicebox,knfiltter,spyderwebclutchlever,4inrisers,bkrest,need corbin seat
0
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 27 June 2010 - 07:09 AM
Here is garry's new and old spyders here I go again one pic per post sorry
0
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 27 June 2010 - 07:10 AM
I was lucky to have ridden this bike only because he was having computer glitches and was hoping I could sort it out. Once I got the ride it became clear there is a computer screw-up when you ride to slow in the wrong gear plus rest your foot on the brake pedal (which is very easy to do) the bike has a coronary lol the steering warning light flashes, the gearbox light flashes and also I think a brake warning thing flashes and the bike goes into limp home mode....this is not fun! What I had to do was turn it off remove key count to 30 and it resets the whole system and then (dont ride) in to high a gear for the speed limit there is no way this bike being a se5 can get into 4th gear in suburbia 50k zones at best 3rd and then with some tripidation.
Now other than that it was a sweet ride very comfortable nice with a radio and the better handle bars.
My only down point is it is dull thur the gears not a sportser type bike with the extra weight and I feel a different drive ratio it is very mushy thru the gears but a great long trip cruiser.
This post has been edited by knife-guy: 27 June 2010 - 07:32 AM
0
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 27 June 2010 - 07:11 AM
0
- Advanced Member
-
-
Group:
SPYDER NATION
-
Posts:
152
-
Joined:
13-March 10
-
Gender:Male
-
Location:australia nsw sth coast
-
Interests:bikes cars family having fun footy fishing twisties and meetin new friends far and wide
-
Your Ride:yellow08 sm5 with mods
Posted 27 June 2010 - 07:11 AM
ok the dates are in my calendar just need to put in a place now comon think ppl and it dont matter if we meet at say kangaroo valley pub and go from there or mosvale what about an overniter at say goulburn then a cruise up the highway to a town for lunch ,or meet at albionpark and go up to robertson and out to mosvale or meet at prorider smithfeild and go up to newcastle  or meet at or meet at woolongong ,warragambadam heaps of spots so there is a few from me
mods tbexhaust,tbjuicebox,knfiltter,spyderwebclutchlever,4inrisers,bkrest,need corbin seat
0
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 27 June 2010 - 07:13 AM
0
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 27 June 2010 - 07:13 AM
0
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 27 June 2010 - 07:14 AM
This post has been edited by knife-guy: 27 June 2010 - 07:18 AM
0
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 27 June 2010 - 07:18 AM
last one
0
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 27 June 2010 - 07:21 AM
rrman01, on 27 June 2010 - 07:11 AM, said:
ok the dates are in my calendar just need to put in a place now comon think ppl and it dont matter if we meet at say kangaroo valley pub and go from there or mosvale what about an overniter at say goulburn then a cruise up the highway to a town for lunch ,or meet at albionpark and go up to robertson and out to mosvale or meet at prorider smithfeild and go up to newcastle or meet at or meet at woolongong ,warragambadam heaps of spots so there is a few from me   Calm down Tony lol Your so hot for this ride!
0
- Advanced Member
-
-
Group:
SPYDER NATION
-
Posts:
152
-
Joined:
13-March 10
-
Gender:Male
-
Location:australia nsw sth coast
-
Interests:bikes cars family having fun footy fishing twisties and meetin new friends far and wide
-
Your Ride:yellow08 sm5 with mods
Posted 27 June 2010 - 07:23 AM
thats a nice bike and some good pics bet your happy with it lucky u
mods tbexhaust,tbjuicebox,knfiltter,spyderwebclutchlever,4inrisers,bkrest,need corbin seat
0
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 27 June 2010 - 07:34 AM
rrman01, on 27 June 2010 - 07:23 AM, said:
thats a nice bike and some good pics bet your happy with it lucky u
This is not mine but a mates who lives not to far from me he was going on the ride last weekend however westerns took the yellow spyder off him as the deposit for the rt
0
- Advanced Member
-
-
Group:
SPYDER NATION
-
Posts:
152
-
Joined:
13-March 10
-
Gender:Male
-
Location:australia nsw sth coast
-
Interests:bikes cars family having fun footy fishing twisties and meetin new friends far and wide
-
Your Ride:yellow08 sm5 with mods
Posted 01 July 2010 - 01:12 AM
cant wait till the next ride i get my bike back on saturday wooo hooo so im lookin forward to the next meet and greet 
mods tbexhaust,tbjuicebox,knfiltter,spyderwebclutchlever,4inrisers,bkrest,need corbin seat
0
-
Group:
Members
-
Posts:
88
-
Joined:
18-March 10
-
Gender:Male
-
Location:Sydney Australia
-
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.
Posted 01 July 2010 - 01:32 AM
rrman01, on 01 July 2010 - 01:12 AM, said:
cant wait till the next ride i get my bike back on saturday wooo hooo so im lookin forward to the next meet and greet
Hi Tony
Thats great listen if your still around near Prorider at 12.30 I should be close to home call over for a coffee I am like 10 mins from them.
0
Share this topic:
1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users
|
|
Sign In »
Register Now!
Help
View Garage
