New Mirror Brackets - can-am Spyder Forums

can-am Spyder Forums - SpyderTalk.com: New Mirror Brackets - can-am Spyder Forums - SpyderTalk.com

Page 1 of 1

You cannot start a new topic
You cannot reply to this topic

New Mirror Brackets Rate Topic:

#1 knife-guy

Advanced Member

Group: Members
Posts: 88
Joined: 18-March 10
Gender:Male
Location:Sydney Australia
Your Ride:08 can-am Spyder se5 equipment: pillion adjustable pillion back rest, madstad smoked high windscreen,Hindle exhaust, offset rear veiw mirror mounts, 4" riser kit, new seat padding,trunk liner, tbr juice box,kuryakin hand grips, personal number plate "shrpn" caliper trim kit, k & n air filter, Evoluzione red sway bar, alloy handmade panniers fitted to givi mounting bracket with led tail lights reversing light and number plate light fitted to these, body wrapped blue flame grafx with signwriting all done over the grey body area, knee pads, rear reverse light and fitting removed from rear gaurd along with number plate and light.

Posted 19 March 2010 - 07:42 AM

I have an se5 08 model with 4" riser kit and the mirrors show you nothing from behind, I like to be able to see over 600mt back to make sure no blue bubble is following :riding:

I have an idea for an adaptor to fit in the bottom of the mirror arm if there is someone with a mill that could make these.pm me
I know there are some bits out there however not the way I have in mind

This post has been edited by knife-guy: 19 March 2010 - 09:29 PM